This simulation compares three half-wave rectifier circuits. The first one uses only a diode and a 100 kΩ load, so the output is just positive pulses that follow the AC peaks. The second circuit adds a 100 nF capacitor across the load. Because the value is small, the capacitor charges at each peak but discharges quickly, creating a large ripple with a slowly falling exponential shape. The third circuit uses a 100 µF capacitor, which stores much more charge. It holds the peak voltage for a longer

3-Phase Full Wave Rectifier Simulation: This diagram illustrates a 3-phase full-wave rectifier, which converts AC from three-phase inputs into a smoother DC output (the filtered output is not shown). It uses six diodes in a bridge configuration to conduct during each phase’s peak, resulting in six pulses per cycle. The waveforms show how the diodes rectify the AC. This setup, alongwith proper filtering, is commonly used in industrial power supplies for its efficiency. #rectifier #CircuitDesign #

This simulation illustrates the working of a Full Wave Rectifier circuit using a center-tapped transformer and two diodes. The waveform at the top shows how both halves of the AC input are converted into positive pulses at the output, effectively doubling the frequency of the ripple. The circuit ensures that during both positive and negative cycles of the AC input, current flows through the load in the same direction, providing full-wave rectification. #ElectronicsEducation #electronicsrd #recti

This simulation illustrates the working of a bridge rectifier for each half cycle of the AC input. In the positive half cycle, two diagonally opposite diodes are forward-biased, allowing current to flow through the load in one direction. In the negative half cycle, the other two diodes conduct, again directing the current through the load in the same direction. The animation clearly shows which diodes are active during each half cycle and traces the corresponding current path, effectively demons